1995 XV750 Tech Guide Error

1995 XV750 Tech Guide Error

The specifications for the carburetor nozzles shown in the XV750 Technical Guide (page 68) need to be updated. Please make a note of the following corrections:

Nozzles:

The front carburetor (#2) nozzle’s part number is 4X7-14921-32-00 and has in its side:

2 rows of 4 holes
2 rows of 2 holes

The rear carburetor (#1) nozzle’s part number is 4X7-14921-07-00 and has in its side:

2 rows of 3 holes
2 rows of 2 holes

The above information should be helpful in keeping your carb parts correct, especially when you are cleaning them.

Virago Starter Erratic:

Certain models of Viragos may encounter an erratic starter engagement. The cause of this problem was an engineering change which eliminated the need for the starter compression spring. The spring was inadvertently installed on some units. The remedy is to remove the compression spring.

The affected units are:

Model Primary 1.D.
XV750G 3AL-041338 to 043366
XV750GC 3CM-015351 to 015530
XV1100G 1 TE-060879 to 062741
XV1100GC 1 TA-021301 to 021430

Note: Before modifying any affected unit, check for a punch mark on the engine number boss on the right side of the engine. This punch mark indicates that the unit has already been modified. Refer to the XV750/ 1100 Service Manual for detailed information about this service procedure.